Both space and plumbing connections are tight in many basement setups. This kind of a situation, it’s possible for the automatic washer and laundry sink to fairly share the same drain. So that you can connect a sink up into the drain inlet, a plumbing work fixture known as a tee will have to be set up in case it isn’t inside already. This enables the drainpipe for the sink to get in touch to your standpipe for the automatic washer.
Install Sewer Tee
Examine the sewer pipeline inlet located nearest the sink and washing machine. It’s usually a free-standing pipeline having an end that is open. If you have perhaps not just a connection that is tee the sink inlet, one will have to be set up.
Turn from the water supply for the automatic washer together with sink. Both these fixtures could have two supply that is separate, one for the hot and another for cold water. Rotate the knobs in the ends for the valves clockwise all the best way to cut off the water.
Unplug the washer through the charged energy socket.
Slice the sewer inlet pipeline in two about halfway down. On steel pipe, make use of a rotary cutting device with a steel blade that is cutting. Make use of a hacksaw or other saw on PVC pipeline. Sand down any edges that are rough the pipelines.
Link a tee fitting to your sewer pipeline. Secure a metal tee into the pipeline with a plastic hose and coupling clamps. Fasten the clamps with a screwdriver. Point the tee in direction of the sink drainpipe. A PVC pipeline https://hookupwebsites.org/adventist-singles-review/ may be glued into spot with primer and PVC glue.
Connect a right drainpipe piece to your the top of tee. Secure it by having a rubber coupling on steel glue or pipe another PVC pipeline in position.